A_feladat_1_start.pkt -

: On routers, enter interface configuration mode (e.g., interface g0/0 ), set the address ( ip address [IP] [Mask] ), and enable it with no shutdown .

: On switches, configure interface vlan 1 with an IP address and no shutdown . 3. Routing and Connectivity A_feladat_1_start.pkt

Refer to the "Addressing Table" provided within the lab instructions to assign addresses. : On routers, enter interface configuration mode (e

A detailed write-up for this type of Packet Tracer lab generally follows these steps: 1. Basic Device Configuration : On routers

: If routers cannot see all networks, add routes using the ip route [Destination Network] [Mask] [Next-Hop IP] command.