If you have flashed the wrong software (firmware) onto your Geant GN-RS8 Mini HD Plus
. The loader should detect the connection and begin the progress bar. Download wrong flash RS8 MiniHD Plus rar
Plug the RS232 cable into your PC and the mini-jack into the RS8 receiver while the receiver is powered off . If you have flashed the wrong software (firmware)
تشخيص أعطال أجهزة الرسيفر الميني بسرعتها Required Tools If the device still powers on
You will need a compatible PC loader tool (often called a "Gx6605s loader") to push the software through the serial port.
To fix this, you need to perform a "dump" or recovery using a computer and a specialized cable. 1. Required Tools
If the device still powers on but shows a "Wrong SW" error on screen, you may be able to fix it via USB: Rename the correct firmware file to . Place it on a FAT32 formatted USB drive.