CDK Software Install Agent Installer

Kk2.jpg Guide

: Place the flight controller (FC) on your frame with the LCD facing the front of the craft and the buttons toward the back.

: Use the "Subtrim" function on your transmitter to ensure all values (except throttle) show ZERO when the sticks are centered. 3. ESC Calibration kk2.jpg

: Connect your Electronic Speed Controllers (ESCs) to the right side of the board. Ensure you use the correct motor layout for your frame type (e.g., Quadcopter X or +). : Place the flight controller (FC) on your

: Plug your receiver outputs into the left side of the board. Follow the pin definitions for Aileron, Elevator, Throttle, and Rudder. ESC Calibration : Connect your Electronic Speed Controllers

: Use the on-board "PI Editor" to adjust the gain settings if your drone feels shaky or sluggish. Beginners can often start with the default firmware settings provided by DroneTrest. KK2.1 Flight Controller Guide - Guides

: Always remove your propellers before connecting a battery for the first time or performing calibrations to avoid accidental injury. 2. Initial Configuration